for more info : 087730111090

SETTING MODEM ADSL D-LINK FOR PPPOE

Written By the world tutorial on Sabtu, 10 September 2011 | 21.14

SOURCE FROM :http://ardiansyahputra.wordpress.com
Setting modem/Router D-link:
1. Open Router/modem Menu by Typing IP Router (modem) at internet explorer or Mozilla, Typing 192.168.1.1. If failed, IP probably had changed. To viewed IP Router (modem), Please read my previous article ‘Setting modem ADSL Speedy untuk PPPoE” at this blog.
The display:
Username: admin
Password: admin

2. See Fig.1.
username: admin.
password: admin.
11.jpg
Figure.1

3. Follow the instructions below.
· Fig.2, Select Run Wizard
· Fig.3, Select Next
· Fig.4, password must be no changed
· Fig.5, Select Next
2.jpg
Figure.2
31.jpg
Figure.3
42.jpg
Figure.4
5.jpg
Figure.5

4. See Fig.6. and Fig.7.
- Typing username.
- If You use service provider of Speedy, so
Password: xxxxx
- You can call your provider to know VPI and VCI
- Select Next
6.jpg
Figure.6
7.jpg
figure.7

5. See Fig.8 and Fig.9
- Select Menu: WAN
- Type VPI and VCI based on your city.
- Select save and reboot
8.jpg
Figure.8
9.jpg
Figure.9

6. See Fig.10, 11 and 12.
- Select Menu: LAN and type Ip Address and Subnet Mask like Fig.10.
- Select Menu: DHCP and follow the instructions based on Fig.11.
10.jpg
Figure.10
111.jpg
Figure.11
12.jpg

0 komentar:

Poskan Komentar