How to Charge Toll Prepaid Electricity | Electricity Token Vouchers

How to Charge Toll Prepaid Electricity | Electricity Token Vouchers
 
Already this month electricity in my house migrated to the prepaid system. Maybe my environment is the area's first prepaid electricity users in Madison, because it is a pilot project.

Before you migrate, the electricity meter was replaced with a new meter that looks at first glance like a home phone. When it was ready, the electricity recharged at Rp 20,000 (30 Kwh).

Toll So much had gone about three weeks. If the pulse out, electricity is automatically broken and the lights of any pet. If the count is calculated, spending far more efficient. Because, usually within a month my electric bill at home an average of USD 80 thousand.

How to charge an electric pulse prepaid:

1. Buy a voucher in the token booth sales (post office, bank or other designated counters) with an identity card prepaid electricity usage (the shape and looks like an ATM card). You will get 20 digits on the receipt of purchase tokens.

2. Input 20 digit number on the last token prepayment meter via the keypad that was there.

3. Prepaid meters will be checked and if the token number is valid, the display shows the value of kwh meter in accordance purchased. And, the pulse was increased, or if power mat due to pulse out, straight on.


source from : http://wawanwae.blogspot.com

03.26 | 0 komentar | Read More

Two modifications CRT Focus

Two modifications CRT Focus
.

Perhaps peer to peer TV technician never found one that has a dual focus CRT were severely damaged (hit by lightning for example), and usually the most severe damagewas in the TV chassis itself. As for the damage in a CRT is rather rare. And if this happens then there is no other way but to make the TV kanibalan not, but it is not the case with CRT.

Well as we all know the use of dual focus CRT itself is also somewhat rare, below there is one series that serves to modify the two tubes into a focus so that focus can be usedto focus a single TV chassis / TV china, of course with a few additional components andcheap. There are several brands that I know have tavung dual focus, namely the SonyTrinitron and Samsung or 29Z7 29Z4. These modifications can be made ​​into a tube tvvarious brands.

Or for those of you who are confused distinguish between one or two focus-focus, haveseen enough of Flyback output cables, we usually find only one cable, two taps for CRTFlyback his focus has 3 wires (fokus1, fokus2, Screen)

In this modification we need only need one big trimpot (2watt or more) that is worth 20Mohm. Actually, this focus voltage division itself has been integrated in the originalcircuit in the module RGB or even in two focus FBT TV chassis itself. The scheme is asfollows:




Screen from the FBT from the regular TV / china can plug it directly into the G2 pins of the RGB socket. And after all is installed correctly, the next step is that you only need toadjust the sharpness of the image that appears.

Quite easy and simple, but it works very well. It will be very useful for those of you whoonly have a dual focus CRT without a chassis.

May be useful.

http://zicelectronic.blogspot.com

04.05 | 0 komentar | Read More

The basic steps of repairing radios and tape

 The basic steps of repairing radios and tape

Usually the radio is broken just a problem in the power supply or damage to a few ICs, transistor or resistor doang. Being the most degraded in mechanical tapenya ama ic-ic importance, other than that rare, most potentiometers audio've worn (the sound crackle-crackle bener right).Well steps:

    Check the power supplynya first, not broken fuse, there is not the output transformer, rectifier diodes keluaranya gak, if not there try in the dressing-related components, eg replace fuse, transformer, replace the diode, change or other regulators such as 7812.
    If you've bener transformer, a check, the output radio / tape are not, if not there, try to check the output from the radio if there is a small voice output, by way menghunungkan spekaer input to the output circuit (prior to the amps), if there is a check ampifiernya most ic / transistor / resistor is defective. Way of checking ic amplifier, attach the finger at the amps input, if the sound of rumbling drone means amplinya still good.
    If amplinya good, but his radio suspended animation, immediately check the receiver circuit, try to check ic receivers, usually the type of LA to FM and MW, just try changing, feeding you should have a stock of standard IC FM / MW, replaced if not influence, try to amplifier middle where tau is broken up into the output circuit to go into the input amplifier. If radio MW, puter puter tuh spool of red green yellow blue sky, where there is signal amplification tau. There may also be a resistor or capacitor that changes its value or dry, or there is a damaged transistor. Wrote a collection of various types of transistors not expensive anyway, most C945, or 9013/9014 well as the type of thing.
    If the tape, used to clean the wheels, make sure karentnya still good, usually mechanical crashed dusty, if it should be replaced, replace aja, kok mechanical tape sold many, if headnya already ugly, replace it wrote, let her voice sighed again.
    If you have a radio that can dikerjain tape, just try, the voltage measured at each kompoen still good, then you rusakin components / removed (eg IC or transistor or diode), then you measure and observe the damage, so learn from the observations .


source from : www.suryanast.blogspot.com

23.43 | 0 komentar | Read More

variety of ways broken tv service

variety of ways broken tv service

variety of ways broken tv service
DIGITEC-DM 172 020OSD thdak out; check T701,T712 (BC547)DIGITEC-DM 14 401Transistor HorizontalB + drop set: check C516(1uf/50v)DIGITEC-DM14214Bright, not contrasfunction: checks T303 (BC557)and horizontal tidal syncron:check T301 (BC548)DIGITEC-DM2076Contras not berpungsi:open pin 25 (TDA 8361) IFGood: replace TDA 8361DIGITEC-DM2142Blue Screen OSD does not exist:replace TDA 8361DIGITEC-DT2082SRegulators are not stable andcan not be adjusted: check pin3-14 of 8380 ic TDA (- / +10k) if too lowmeans short please change!DIGITEC-DM14D031V. Hold does not function (ic, Vccwell): check C302, C303(47uf/25v) dijalur CV BS / AVDIGITEC-DM143030Blanking: check T712 (BC547)in horizontal lines syncronDIGITEC-DM143031B + over to 250V: checkR510 (1k) in the regulatorDIGITEC-DM1452Blanking: check T202, T205and T305Bright, Contras membelobor:check T808Channel center frequencyuntil top is not there: checkC102 (22n)DIGITEC-DM1430EAuto program directly UHFand there are writings AV 1 or AV2: replace the original EPROM 93C46AV no pin 15 of ICOver TDA8361 up to 8Vshould be 3.5 v: replaceTDA8361DIGITEC-DM172020B + Over and can not beAdjust: check Transistor DriverRegulators (C3807)DIGITEC-DM1452GBSometimes coloredsometimes it does not: change elcoFilter B + (4.7 uf/160v)Test: try pralel Resistor 10kdh R513 pin 21 on IC TDA8690
SHARP-51R200
In the star of life and death, led sored: check R502 forVertical voltage Gati if necessarySHARP-14R20MKIIIn the star lived and died a green LEDso red is not blinking,Horizontal oscillator nice: checkHorizontal driver transformerSHARP-20U200Voice-gresek gresek, picturesGood, sound system is lockedon D / K and can not be replaced:change and adjust, eprom 24C08SHARP-14S20B/14R/BOSD does not exist, image slidingapproximately 10cm to right: check the pathAFC Pin 5 FBTSHARP-20A2-SBlooming Picture (memblobor), Nice colors: Stel ulamgservice prameter AdjustmentSHARP-C1424AUB + ride So 250V(Resitor, elco, diode transistor, Vccgood): replace STR 41 090Regukator silent (nowork): check TR3279, D706,R705, R706, R707Damage PANASONIC TVPANASONIC-TC20T8Regulators do not work (dead):check Q8 1 (C5253/C4804) andQ805 (A1512/A733)PANASONIC (AN5601)No color, in Finetuning there: check Trans amplifierdelay (C1685) instead of the delay linePANASONIC-TC1613RAs if tuning slide(Misses) and did not syncron,good sound: check R125 (3k3)replace with 1k2PANASONIC-TC2088DXContrast is not berpungsi,sometimes appear in vertical lines,nice picture: check Resistor ABL(37K)PANASONIC-TC1450Blanking and protectionism: replace AN5600No sound: check Q1112,Q1113 (N4212) and change C114PANASONIC-TC2088Bright, contras, the color is notberpungsi normal OSD: ChequeABL resistor (63k)GOLDSTAR-Soudmax
Color is sometimesmissing: check and replace cramicpin 11 of IC TDA8690GOLDSTAR-C14D22No sound, tuningmenual not stop: checkQ06 (C3198)GOLDSTAR-C14D22Standby in star protectionism, ledflashing: check 6v8 zener diodein the PSU, if distar leddead: check SE 110GOLDSTAR-CA14A95CTuning menual notstop: replace UCOMGS8334-02BGOLDSTAR-CA14A62Thinned image is replaced PIFRemains the same: check Z201(CF5, 5MHz)GOLDSTAR-CF14D20Sometimes colored imagessometimes not: open R73Q07 foot baseGOLDSTAR-CF14D20In the star led the flame, continue to die(Not standby): check pin 9S6707, when the unstable (PUMup) check FR813 (1ohm) andZD803 (9V1)GOLDSTAR-CBS4821No color, when the ICDelay any new hot colors:MC144111 replace. Topin 4 open test continuescolored.Preset panel does not work:open pin 6GOLDSTAR-CF14A170DNo sound IC AudioLA7555 Good): check L201 (SIF6.0 Mhz) and the capacitor is damaged(82pf)GOLDSTAR-SoudmaxBlanking, RGB VCC nice:replace TA8690GOLDSTAR-SoudmaxStandby with position lightLED blinking: replaceRU2k diodes near STR 6707with D IN4007 change anyway:C330 (470uf/35v)GOLDSTAR / LGOften turns itself into a positionstandby, if the remote inturn on the TV to lifeback, but returned stanbyafter a few hours: replace ElcoHorizontal Driver (10uf/100v)
SABA-MS305
OSD does not exist: Check Resistor68k on the base of the RGB amplifiers(The base should be 4.8 voltsBlankin: Check Transistor videoTV 05 (BC558)TOSHIBA-2840XHVertical defect Resistors,elco capacitor, IC, goodall: Checks Vertical feedbackdrivers out voltagenormally 3-4 voltsCONTEC-KTB 3731Color chaotic, IC vidioGood M51393 Check R235 (8k2)usually brokenNATIONAL-0 (AN5601)In the star died instantly(Protectionism) normal Vcc: Check Q504METZ-7401 / 3Can relay on B + does not exist:Check R808 (2.2 ohm 1 / 2 watt)and R821 (56 ohm 1 / 4 watt)TAMASHI-0 (TDA8362 /SMP260WTC)In the star directly protectionism: ChequeHorizontal driver transistor(C2482)SABA-MF5222Contras are not functioning,voltage swing okay: Check RL05(100k) pin 3-4 on FBTThe top of the vertical defects:Check CL15 (220uf/16v)Vertical opening of about1cm taken: Check CF (476n)SANSUI SV-M1460JThe sound there is no voltageNormal swing: Replace the TDA 1013.JVC-C147LNSProtec: Check M52016 anddeflectionDETRON/ETRON- P1401Horizontal none,Osicilator, normal Vcc: Replace TA7698OKE-3732Live TV, about 5minutes immediately standbyMN12C01 good eprom: ChequeToll pathway, Cramic short 22nINDOTEC-2107The top of the vertical defects:Check R304 (56k) is usuallydelayedAkari-CT14W9AN open vertical5534 Cold: Deflection partsVertical dropOSD does not exist: 5v Voltage5 volt zener diode drop shortDAEWOO-DMQ1449MThe top of the vertical defectthere are white lines: replace LA7837Aetna-C1420Can not standby, directstar: replace TMP87CK38NBlanking, normal Vcc: ReplaceTB1238ANTuning slide, sound slit,Vif is not working: Replace SAWFilterKonka-1418C3B + is not stable (PUM-up): Chequeoptocoupler (PC817)RCA-E14500/SABA-MT3751LED lights blink-kedgp, BNormal +: Change STV8224Ano sound, pictureTDA7253 Vcc normal good,Normal Voltage swing: ReplaceSTV8224AVertical top 3cm less:Adjust B + to 100 voltsTHONSONS-CTV145AVStandby, can not star: ChequeCrystal IC ProgramCRWN-t128In the snoring sound star, after3 minutes Normal: Replace transformer SIFSEMRO-TD1538B + can not be adjusted (insets): Check R808 (10k) inregulators.
Akari-IC 14M88R
Regulators do not work: Checktransitor voltageoptocoupler.Akari-IC 1437RMDRegulators do not work: Checkzener diode ZD812 (18V), C815(100uf/25v) and C820(1uf/100v) replace if necessary.SABA-MF3F02No color (blackwhite), picture okay: Check LC02(Pin 36 M52038) and47pf capacitor.TELESONIC-TC5191GRPower on, relay on,should standby: Check C120(22uf/50v) at the baseTransistor TR113Johnsons-(FY 7698)Color membelobor: Check elco1uf/50v at pin 6SAMSUNG-CB3366ZSMR 40 000 Damaged, after thereplace broken again: replace the firstHIS 6169 driver moduleAuto Program may, memory,Adjust, Vertical, Horizontal, RGBnot berfunsi: Replace EPROM24C04DAZZ-DZ2570ADo not want star: Chequethe base voltage of transistorsHorizontal, normally 8 voltsDAEWOO-DMQ2044OSD does not exist, but the panelberpungsi: Replace the IC program(M34300M4-230SP)FUJI ELECTRIC-(TA 8659, TA8403)B + up to 300V: Chequeelco 10uf/160v at pin 1 STR58 041.BALAUPUNK-CTV54158JKMatrix chaotic (not PAL):Check R523 (10k) is usually brokenSONY-KV G14P1Dark screen, OSD there: Check the ABLR857 (82K)SONY-KV1415GEHorizontal Transistor toohot: Check the OSC pin Horizontal27 and replace CXA1213BSAIWA-A205KEROSD no Vcc, cristalNormal: ChangeM37220m3-150SPOSD only red:replace TA8759BNBlanking: Check D302 zener12v (Croma Vcc)SOLITRON-RM5108Tuning slide, Vif okay: ChangeTDA 8222No sound IC Audionice: Replace and Adjust SIF(102)Chancellor-P191OSD nonexistent (not inprogram): Check D102 (4148) innear the IC programGRUNDIG-p37-832There is a little picture blankingcriiit votes: Check C803(220uf/25v) and C806(220uf/50v)Sharp-edge imagespiky: Check C925 (470uf/25v)12v Vcc filterMAYAKA-R14MC02Vertical defects (linesditenga black): Check C406 (22n)R416 seriesSANYO-C14C11U (14U)Standby (not star): ChequeR555 (47k)PHILLIPS-14GR1024Over voltage, Protec: openD6638 and Adjust VR, B +should be 97 voltsBlanking, a normal voice: ReplaceTDA 3653BINTEL-IC2053RM/1461NWOSD does not exist: open zener onvertical socketVif in the tuning does not change:Replace LA 7555PHILIIPS-C14PT138JStandby, the star protectionism: Check ICVertical if necessary, replace the ICTDA 3653BINTEL-IC1429NRight and shrink imagesleft around 3cm: Check C707(100uf/50v) and D703(IN5392)
SUKIRA-CE1493
Vertical open about 8cmditegah: Check the voltage of pin 42of the TDA8361 IC, the voltagenormally 33vGRUNDIG T22-3229-panel is not berpungsi, OSDNormal: Replace R140 (820k)a 486k on the baseTR107SABA-MT5253Protectionism, the star of life continuesdeath, a normal 9v voltage: ChequeVertical IC TDA 1771Test: open the pin 9, then the starOKThosiba-1450XNE (DramaticVision)Regulators are not stable: ChequeD873 (16V zener) on the regulatorSANYO-CG20SR1G (Glaxy)Blanking: Check EPROM (A81DC-PD07): Replace with 24C08FUJITEC-FTC1499Horizontal phase shiftapproximately 15cm to right: Chequehorizontal driver transformerSABA-MF5222Tuning slide (Vif in tuningfixed): replace the LA7550 withLA7555 definitely wrongSANYO-KV-G14B1Protectionism, the last living stardied: Check C623 (220uf/50v)SOLITRON (CTV222S Program-PCR1, 1Could a flame, but all the panelsnot berfunsi: Check the voltagereset pin 33 (15V)ADVANCETuning slide: check and replaceWith E08L (Capacitor 68pf)Adjust AGC (in service menuAIWA-C143/203Picture Red (red): ReplaceEprom and Adjust RGB (whitBalanceSONY-KV1430EVertical defect (centerthere are white lines around the picture2cm) Check C854 (220uf/25v)filter 12vSAMSUNG-CB3862XOpen image ditengaapproximately 5cm, IC Vertical nice:G anti elco vertical out1000uf/35vAetna-C1426Vertical upper stretch, thetake less about 4cm:Replace eprom 24C04Figure ugly, snoring soundsNormal auto tuning, as well VccNormal: Check SAW FilterHITACHI-CPT2451Y (luminance) does not exist,Croma (stable color image):Check the series diodes, transistors vidioout, the pin 24 of IC LA7686NATIONAL-TC1475Tuning slide (IC, tuner, IF,and Vcc everything is normal):Check C1131 (0.33 uf/50v) andC1132 (0.47 uf/50v)dirangkaian VT.Akari-IC 14M88R (cherry)Regulators are not stable withoutload, sometimesStandby: Check the 6v2 Zener diodein VR B + (Short)Thosiba-2955DEAutomatic search good,images are not color, soundslit: Check Adjust L671 inSIF moduleIC INTEL-205RMMenual tuning does not stop,normal picture, Vif uda instill would not changestop: Replace LA7555Yoriko-YK2103ETVertical bermasala, VccNormal: Check the input voltageIC7812 bole no less than15VFUJI ELECTRIC 25 "Image not syncron:Jumper pins 1-3 in CN203(Teletek) with Resistor 100ohm
Akari-IC1439 RMD
B + drop, no heaternormal voice: check C561, R443Akari-IC1439 R2NRaster No, normal Vcc:check R411SAMSUNG-CB3339ZBlanking: check the voltage 5v(7805)SAMSUNG-BIO-CB3366ZBlanking (normal Vcc): replaceChroma IC M52309SPSAMSUNG-CB2039ZThere is no channel tuning(33v, VT Normal): check the voltage12vAIWA-C142KEROnly the vertical line: check12v voltageSONY-KV1415GETuning can notdistorted channel: replaceUCOM M34302M8-712SPSOLYTRON-SM3725In the position of AV sound chnnelemerged: Q1006 checks to pin 12of IC 4053SOLYTRON-SM3792Tuning can be stopped, butchannel is not saved: checkMemory-30V supplySOLYTRON-SM3730Sometimes the star could sometimesalso die: check 15V, C853(4.7 uf/50v)FUJI ELECTRIC 29 "(TA8659)Matrix chaotic, rednot out, IC and normal Vcc:check R729 (8k2) on pin 2SUKIRA-CE1493Normal standby position B +when distar drop: check D606TOSHIBA-2545DE (TA8808)Regukator and the relay does notstable (PUM-up): Checks Horizontaloscilator out, and replace the crystal500F2 503F30 with ordinaryAKIRA-CT21PF9AV is not working, logicand 4053 normal controls: checkpin 42 on IC LA76810FUJI ELECTRIC 21 "(TA7680)Tuning slide, search thdakstop: Check the capacitor inPIF (68 PF)DAZZ-145 038Blanking and there are linesblack, normal voice, the OSD is notthere: Check the filter 180v elcoTHOMSON-TS4225Vertical deflection in pairsprotectionism, off okay: Check the twoseries resistor (1.5 megapixel) whichtoward the vertical pulseCHINA MACHINE TVRegulators shut even withoutload: Check capacitor in the basepower (15N)JVC-AV-G201Horizontal image slipand party-blang black / whiteapproximately 10cm: Check C550(100uf/16v) at input 7805MITSUNO (LA7688)Sometimes the standby sometimes star:must replace the EPROM 93LC56,if the 93C56 can not beSABA-MF522Blanking, a normal voice: ChequeAV switches TE2014Tests: jumper on pins 10-13AV socket moduleThosiba-20N3XE (Bomba)Lost color, pictureNormal: Replace IC TB1231
DIGITEC-DM142021,
MN152451FELVoltage VT is not going the wayusually damageresistor R734 33kContrast is not working,kerusakanya on resistors220K R345 and R436 from 10kABLDIGITEC-TDA 8361At first dinyalahkannormal image, thenThere continues to shrink imagesHorizontal line, left kanangless, due tolack of voltage 8V: checkits supply circuitSometimes notcatch the broadcast causedAGC voltage 0: Please inbrowseVertical folding sectioncarry, sometimes for longback to normal: Check C202 22nfusually rather short (52 pinof IC TDA8361)DIGITEC-Super ninjamissing color solutionare: pin 21 of ICTA8690AN there is a resistor10k continue serikan with10k resistor to GND, but replacea 10k resistor to GNDwith a 5k resistorDIGITEC-143031BCan not catch the broadcastplease check TR303 and TR309OSD does not exist please checkTR712DM DIGITEC-1411MImage not sound normalthere is only voice-gresekgresek but sometimesnormal voice: Check zener diodeZD 8V from the pin 55 IC STV2286DIGITEC-HBM-00-02No image appears onlyThere Horizontal lines at thebring the screen, due tobecause of damage to the IC ProgramDIGITEC-DC1402KPicture too large, insearching through the broadcast,while the AV is good,due to damageC133 2.2 / 50V pin 53 of ICTDA8841, AGCDIGITEC-DM172021Unable to savecurrent program in searchingalthough transformer AFT (9074) and Vif(9073) masi nice: Pleasereplace D712 = 5volt in dejat ICMN12C201D memoryDIGITEC-Black Bauty BB2071Voltage 300V and 115Vthere and only star flybackbriefly, Voltage 12vIC OSC exists for Horizontalthere, the TV still does not want to ajastar: please replace C76 180ndiregulatorDIGITEC / politron-DM143031Slow to star along withpicture flashes andsway, as well asnarrowing the width of the image:please replace C518 = 100/35v,C514 = 330/35v,C515 = 680/606pf, R511 = 5kohm / 1%, R517 = 15k ohm / 1%DIGITEC-DM143031b.First turned onplain white images appearand all the panel did notserves as the voltage12v to 22v only measurablewhile the maximum tension is only 12vmeasurable 10v: Please replaceR557 = 330 ohm/1watt


source from : http://felloelektronick.blogspot.com

23.32 | 0 komentar | Read More

How To Fix Split AC

 How To Fix Split AC
Damage: AC can not cool
Symptoms appear:Condenser fan motor is not spinning, spinning the compressor motor.
The initial examination:

    Turn on the AC (through the evaporator.)
    Observe the symptoms that appear include air out of the evaporator blower is cold or not?
The result was: rotary evaporator blower motor, but air can not cold.

    Observe the condenser!
The result was: - Water is dripping from the drain hose.- The compressor spins, the condenser fan is not spinning.Examination of the AC working.

    Open the lid valve in the condenser (3 way valve)
    Attach a double valve manifold meters. Observe the result: the pressure was very low (0 psi), which means the gas is discharged from a pipeline leak.
    Turn off the AC again.

Means the need to repair two sections:

    Evaporator section: clean front grille and filter2nya.
    Condenser section: - Improved condenser fan motor

           - Cleaning of dirt on the condenser.Due to motor repairs need to reduce / remove the outdoor unit (condenser) from the holder it is necessary step to save gas while R 22 into the compressor.The process of storing the gas the same as steps to disable the AC.
 Motor repair it is necessary to step back charging R22 gas into the air conditioning system.
After AC power off

    Disconnect the power cord, check the terminals on the cable colors so as not to forget when put back.










    Disconnect the pipe from the evaporator to remove the nut-nut fastener.
    For a while, close the ends of the condenser tube and the pipe connecting the open with plastic so as not to let dirt.
    Lepaslah condenser amplifier of bolt nut holder.
    Do repairs and checking the condenser fan motor.

Examination of motor• In a state with no voltage, fan blades can be rotated smoothly by hand.• When connected to a voltage source hard fan in turn by hand can not even., There seems to be the brakes.· Tested try the capacitor is replaced with a new capacitor, the motor remains difficult to spin.· Taken conclusion was faulty motor (the motor shaft is not funny = center).
After the motor repaired;· Place the re-condenser unit on the stand before.· Reconnecting the pipes as the original state.
The process of cooling the gas filling return
            Is the same as step activates AC. Namely:
1. Connect the manifold gauge hose (double meter) on the teat drain plug on the outdoor unit (condenser) which is the left channel is facing down. Tap and double tap valves are still closed state.2. Connect the power cord plug at the evaporator to the source voltage (meshes). After all the connections and the installation is complete then ready to step activate AC.3. By using the L key (key peg) is appropriate, play a little at the drain plug tap counter-clockwise to open the faucet tap channel compressor contained in the condenser (picture right). Amati was the appointment of a meter double, double meter needle will move to the right / the numbers go up and stops at a certain rate (eg 200 psi). Let this state for a while so that refrigerant gas circulated to all channels.4. Using foam soap olesilah water pipe connections to determine whether there is a connection that is leaking.· In the event there is a leak in one pipe connection close the drain plug press compressor .. Fix the connection before the pipe by tightening the nut or replace the seal-seal the damaged tape to reassemble until absolutely nothing is leaking a bit.· Repeat steps to open a channel and check sambungab with foam soap earlier.5. If there are no gas leaks at the connections, do the "penggebresan" to remove the residual air remaining in the manifold hose blue. The trick is, open the faucet a snap manifold dual meters until the end of the yellow hose manifold that opens the gas issue reads "jeesss". Repeat this step 3 times gusts of gas with a short lag time, eg jeess jeess .... ... jeess. Close the valve tightly double.6. After that, with the key L is also open the cover bolts to the compressor suction line inputs are on the press line. After closing the channel was opened refrigerant gas (Freon) will circulate / circulation of the compressor - condenser and returned to the compressor again. Wait a few moments.
7. Turn on AC power by pressing the ON button on the indoor unit (evaporator) or use an existing remote control. (For now usually remote) is marked with a resounding "tiit". AC compressor can not directly work / life, wait a while (± 3menit) to know the workings of the compressor.8. After approximately 3 minutes, the compressor will start work / bike path and circulate the refrigerant gas R 22 that already exist throughout the air conditioning system resulting in continuous circulation.9. To know the usage time of a normal AC current by what does not use pliers amperes / pliers to measure the current flow into the compressor and condenser fan motor on the part. Clip pliers amperage on one power cable that goes into the condenser, observe and read. If the current user is not normal (more than the price of its name plate, eg 3 Ampere), do the repairs first before proceeding to enable the AC.10. Wait a few moments and look for work check hasl AC. To ensure that the AC is working normally iindikasi The most obvious is through the evaporator (indoor unit) actually produce cold air / cold and is characterized also by the presence of water dripping from the drain hose water on the outdoor unit / condenser.11. If there is water dripping from the drain hose means a normal working process and the activation of AC has been successfully conditioned.12. Remove the return hose from the valve manifold drain plug and cover again with myrrh TSB channels cover the pipe end as the original state.13. AC activation is complete.14. Offkan re-conditioned when the trial period has been completed by pressing the remote there.

 

source from : http://bengkellistrikcom.blogspot.com

22.34 | 0 komentar | Read More